Negative-side Foam Grouting

Negative-side Foam Grout is a hydrophobic water cut-off grout and soil stabilization used with highly pressurised special grouting pump designed and developed in Germany based on a MDI (methylene-diphenyl-isocyanate) polyurethane. The resin is 100% solvent free and 100% solids. The gel-time of the product is adjustable by the mandatory adding of a certain percentage of 15X Accelerator.

Upon contact with water, Negative-side Foam Grout reacts to a foam while expanding its volume 30 to 40 times. The cured material is semi flexible and of a constant volume. Since water is not a component of the foam structure, the cured material is essentially not effected by water or dryness. The reacted material does not shrink or swell.

Negative-side Foam Grout is designed for cutting off gushing water of high pressure and speed. Due to the low viscosity of the material, Negative-side Foam Grout offers superior penetration in hairline crack injection. The product is also suitable for the filling of larger spaces, cracks and honeycombing in stone or concrete structures. The product can be applied as a non-shrink, high strength soil stabilization grout when used with very little accelerator. The moisture content of the soil must be sufficient to ensure reaction.

This process is easy to use and can be applied without any breakage/damage to the existing structure.

Waterproofing of Basements

We offer basement waterproofing services as per the requirement detailed to us by our clients. Dampness and moisture in the basement can lead to the development of mildew and mold. This can eventually decompose the base, Though interior waterproofing can avoid the water leakage in cellar, it only slightly prevents the interior of the partitions from getting harmed. This can damage the paint of your wall, and also damage the insulation. Basement exterior waterproofing takes care of your walls inside by avoiding water leakage. Waterproofing basement walls involves digging earth from around your homes foundation. Some products of waterproofing are either sprayed or fixed in sheets.

Repairs and Rehabilitations of Buildings

It is our intent to make our client’s life easier by addressing all of their waterproofing needs and ensuring their buildings stay water tight. We have a team of experts who offer Building Waterproofing services using sophisticated technology to keep building dry. We realised that the most of the damages were due to ingress of water into the structure.

We are completely devoted contractors for the waterproofing jobs. We provide our clients with most reliable and effective waterproofing solutions. This service is commonly used when:

  • Internal floor levels are lower than external ground levels
  • Neighboring structures or properties are constructed at different levels

Elastomeric, Waterproof & Weather Paints

We offer application services for Elastomeric weather paints. Elastomeric paints is a decorative coating which has all capability to offer long term protection against movement of cracks in plaster, and durability for at least 5 to 7 years Surfaces to be applied upon, must be clean, reasonably dry, free form dirt and loose material, and be as smooth as possible. Most exterior paints are not thick enough to withstand continuous rain lashing, environmental attack and crack movement over several years. That is why even expensive exterior paints offer limited protection. Elastomeric weather paints answers this problem for rain lashed walls, by ensuring a heavy duty coating that offers waterproofing ability.

Waterproofing of Expansion Joint

We are Cleaning the surface from dust, mortar splashes loose materials etc to get a sound concrete surface. Repairing of all cracks and honey combing with epoxy putty or rich cement sand mortar admixed with waterproofing admixture. In case of cement mortar repairing sealant treatment should start after 28 days of repairing. Expansion Joint Treatment Clean the joint with wire brush, nylon brush and air if possible. Filling polystyrene based back-up rod in the joint to hold the sealant.

Waterproofing of Raft & Retaining Wall

We have a solution that without breaking of plaster of external walls we can give a waterproofing solution by application of paint. We also use elastomeric paint, polyurethanes, polysulfides and polymers of various companies for external wall waterproofing.

Surface preparation and applying hydrophobic, breathable sealer treatment that impregnates deep inside the surface due to low surface tension and is resistant to the alkalinity of cement plastered surface. The treatment will bridge the hairline cracks and prevent ingress of moisture and capillary condensation on the surface and increase the life of the paint. It will also prevent the hairline cracks from becoming more visible due to accumulation of dirt and give better bonding to the paint. Impregnation with oligomeric alkyl alkoxy.

Waterproofing of Swimming Pools /Water body

Our company provides all types of waterproofing for swimming pools so that all edges are sealed and no leakage occurs, which saves damage from water to the underlying structure. Our experts use coating, which converts hard and rough pool to smooth and slip resistance swimming pool. We provide this service to make client’s pool aesthetically pleasing and easy to clean.We offering world class waterproofing service at reasonable price. Due to best quality and cost effectiveness, our waterproofing service is preferred by numerous clients.

Waterproofing of Terraces , Toilets, Balconies, etc.

We are involved in offering Terrace Water Proofing services to construction industries. We offer Terrace Waterproofing Service of international standards. The services offered by us is long lasting and find application in new and old buildings, terrace. We take care of all the pre-requisites before undertaking the waterproofing of the terraces.

These are done as per the requirement of our clients bearing in mind their specifications.

Waterproofing of Underground & Overhead Water Tanks

Our Water Tank Waterproofing service includes internal waterproofing for over head waterproofing tank and external wall waterproofing.In internal waterproofing for tank, we cover internal and external structural membranes with a layer of quality cement mortar. This is carried out by a team of professionals, which follows streamline methodology that includes breaking RCC surface, curing and preparatory work such as hacking out loose concrete cover. In external wall waterproofing, we apply one coat of primer and two coat of elastomeric waterproofing coating on the prepared surface as per approved shade and color to avoid leakage of water.

Epoxy /Polyurethane Coating & Flooring

Effluent Treatment Plant (ETP) is most cost Effective & technically proven system to remove the unwanted, hazardous chemicals from the wastewater to meets the statutory pollution control requirements, especially for chemicals, pharmaceuticals, phosphating and electroplating wastewaters. The following process description and schematic flow diagram will assist in the understanding of the treatment processes used for the Wastewater Treatment Plant.

The Wastewater Treatment Plant is divided into five principal chambers; Anaerobic chamber, Aerobic chamber, Clarification chamber, Disinfection chamber and Pumpout chamber.

Waterproofing of Podium Slab

The typical character of podium slab demand for specially designed waterproofing system. The slabs are vast in area and are hence prone to cracking due to thermal stresses, shrinkage and vibrations. Any conventional waterproofing system built over these slab does not work for long since the cracks in the substrate induce cracks also in waterproofing system. Hence there is need for a waterproofing system that is floating.

Products We Use